HOW TO FLASH AQUOS PHONE NEW TRICK BY MR FLASH MOBILE SOFTWARE

Sharp Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

First, turn off your Sharp Android Mobile by holding down the power button.
After that, Hold the
- Volume Up + Power Button
- Volume Down + Power Button
Release all buttons, when the Logo is displayed.
Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
Then while holding down the Power button press and release Volume Up Button.
Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
Now a screen with NO and YES option will appear, with the volume buttons go to the YES option and press with the power button.
After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.

In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
After that, Locate Downloaded Firmware Update file from Storage.
Now tap on the Firmware Update file and install it.
Finally, your device should boot to the new version.

Download the firmware file and move to SD Card storage.
Turn off your Sharp Android Mobile by holding down the power button.
After that, Hold the
- Volume Up + Power Button
- Volume Down + Power Button
Release all buttons, when the Logo is displayed.
Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
Then while holding down the Power button press and release Volume Up Button.

Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
Now a screen with NO and YES option will appear, with the volume buttons go to the YES option and press with the power button.
Once the reset is complete, you will be bounced back to the same recovery mode menu.
Then select Apply update from SD card option.
Now locate the downloaded firmware file from Storage.
After that, Tap on the firmware file and install it.
Your device will begin updating automatically.
After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Thank By Mr-Flash-Mobile-Sftware

come soo